Android Hardware Development Kit

The Android Hardware Development Kit is designed for enterprise embedded developers looking for a single, all-inclusive solution for a variety of prototyping needs.

Android Hardware Development Kit

Android Hardware Development Kit is the first Open Hardware solution designed for full hardware customization. Together it is a Open System Design Solution.

Android Hardware Development Kit
Runs with a 720MHz ARM-based, open source BeagleBoard C4

Some Features are

  • Display: 4.3 inch touch display
  • Screen: 480×272 OLED screen
  • RAM: 128MB
  • 32bit Single Core
  • SD Storage: 4GB SD Storage
  • On Board Flash: 256MB
  • 4 USB Host Port Adapter
  • Wi-Fi 802.11b/g
  • Ethernet (RJ-45) USB 2.0 10/100 Ethernet Adapter
  • Video Output: DVI to HDMI
  • Video Output: S-Video
  • Speaker (Stereo Headphone Out): 3.5mm Audio Out

Wireless Phone and your Arduino

We all have phones and we can create apps too. This makes a Arduino a bit isolated without connectivity.

Using some of these Shields you can gift Smartphone Power to your Arduino. Create a Home Automation System with a Smartphone App control. An interactive Robot with SMS. Create a Process Automation System with SMS Alerts too.

3G + GPS shield for Arduino

3G GPS shield for Arduino
Connect to high speed WCDMA and HSPA cellular networks. Make web interactive project like the “Internet of Things”. The module counts also with an internal GPS what enables the location of the device outdoors and indoors.

  • HTTP and HTTPS (secure mode) navigation, download, upload to web server.
  • FTP and FTPS (secure mode) protocols are also available.
  • Send and receive mails from Arduino using the SMTP and POP3 clients.

Arduino GSM Shield

Arduino GSM Shield

The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.

GPRS Shield V1.0

GPRS Shield

The GPRS Shield is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. The GPRS Shield is configured and controlled via its UART using simple AT commands. Based on the SIM900 module from SIMCOM, the GPRS Shield is like a cell phone. Besides the communications features, the GPRS Shield has 12 GPIOs, 2 PWMs and an ADC.

ARMduino and Coridium – Network Friendly Embedded Systems

“Our products are designed to configure themselves on most networks. The development environment is something you already use every day: Your web browser and text editor.”

ARMduino and Coridium – Network Friendly Embedded Systems

From Hyper Embedded – Microcontroller ASIC and EDA

ARMmite PRO – Low-cost SBC – Coridium

Features Include

  • Arduino PRO footprint compatible
  • Compatible with 5V shields
  • Development software Basic and C
  • ARM7 CPU running at 60 Mhz
  • 24 TTL compatible digital I/O
  • 7 10-bit A/D converters, 100 KHz sample rate
  • 8 Hardware PWM channels
  • Internal supplies of 5V, 3.3V and 1.8V