VK5JST Amateur Radio Ideas with Photos

The new Ham Project Pages are VHF/HF Aerial Analyser, A 600MHz Frequency Counter.  Then there is a an ESR Meter for Electrolytic Capacitors.

VK5JST Amateur Radio Ideas with Photos

With a two tone tester, a dummy load and an oscilloscope, a transmitter can be really put through its paces. Two tone testing consists of applying two clean non-harmonically related sine waves of approximately equal amplitude to the audio input of an SSB transmitter.

Simple Two Tone Oscillator

 

The sine waves are typically around 600 – 700Hz and 1800 – 2000Hz i.e. about 300Hz from either end of the audio pass band.

A Simple Two Tone Oscillator

This project was published in the September 2004 issue of the Australian magazine “Amateur Radio”.

Other Readworthy Pages

  • Easy PCB’s Made With Kitchen Appliances
  • How to Make a Q Meter
  • Making a High Current 13.8 VOLT Supply For SSB Transceivers
  • VK5MM’s excellent amateur radio homepage
  • Transformer Construction Details
  • Shortform Method of Designing Power Transformers

The photos at VK5JST Homepage are very educative and express the idea better than words. – delabs

Quasar Electronics – Hobby eStore

They specialise in online mail order electronics for industrial, educational and domestic applications. The company’s founder started selling electronic kits back in 1993 .

Quasar Electronics – Hobby eStore

Electronic Kits, Modules, Hobby Projects UK Superstore. A specialist retailer and manufacturer of electronic kits and modules with over 20 years experience.

Quasar Electronics - Hobby eStore

From electronic starter kits and project labs for kids to hi-fi quality valve audio amplifier kits for audiophiles and industrial controller boards for commercial applications

Official distributor stockists for Velleman, Cebek, Smart Electronics and Quasar Electronics. They also have power supplies, inverters, cables, leads, components, connectors,tools, soldering irons, multimeters, function generators and oscilloscopes.

Quasar Electronics Limited
PO Box 6935, BISHOPS STORTFORD, Hertfordshire CM23 4WP
UK – England & Wales

Tom Jennings – World Power Systems

“I make things, mostly technological, but don’t hold me to that, consistency is not a human virtue. Electronics and software, cast iron and plastics, microcontrollers in vintage automobiles, faux historical machinery that could (not) have been; finely crafted, rigorously rugged, reliable, most often.”

Tom Jennings – World Power Systems

The Model 01a (aka M01a) is a 3″ x 5.5″ self-contained controller board designed for embedded applications. It’s based around Microchip Inc’s in-circuit-programmable 14-bit PICs, and contains I/O expansion, a power supply and various goodies that I found useful in five years of using my previous controller board design.

WPS Model 01a Control Engine

WPS Model 01a Control Engine

The M01 board contains enough support hardware to pull off a lot of functionality. Before I get to handling common interface problems here’s a function-by-function description of the hardware. There’s some subtlety to some of the design that’s worth paying attention to.

Index of www.wps.com, by subject

Technical reference data; obsolete, obscure, hard to find, and sometimes just plain old; mostly things made or written by others.