It is called analog dial timer as it has no digital display, but the chip is digital it is CD4541. It is Mains operated, you could make on-delay or off-delay. By changing the caps and resistors or with even dip-switches you could get timing of few seconds to many hours. Circuit is Analog Timer 4541 .
Some timers energize the relay after a set delay on power start. Some start with relay energized and turn off after set time. Motors and big systems cannot take fast turn-on and turn-off, Some systems will require sections or modules to start one after another as they are interdependent.
The CD4541BC Programmable Timer is designed with a 16-stage binary counter, an integrated oscillator for use with an external capacitor and two resistors, output control logic, and a special power-on reset circuit. The special features of the power-on reset circuit are first, no additional static power consumption and second, the part functions across the full voltage range (3V¨C15V) whether power-on reset is enabled or disabled.
- Available division ratios 28, 210, 213, or 216.
- Increments on positive edge clock transitions.
- Built-in low power RC oscillator.
- Oscillator frequency range . DC to 100 kHz.
- Power on Auto reset initializes all counters.