Digital Count-Up Timer Gadget


Digital Timer Gadget Visual Interface – Here is is gadget GUI for Industrial Process control, WebApps. The buttons make a sound and Light up internal LED lamps. Power On-Off control, Digital Timer; Start, Reset Scroll and Select are the controls.



The advantage is that the industrial process or Home automation can be monitored and controlled on any computer including tablets which has a Browser. The plant automation or Home appliance can be regulated even as you travel back from factory to home. Or in any city from the Cyber Cafe. A Wireless Lan and Computer with Browser is all you need.

Press The Power on-off for a soft start, this is to prevent the inrush current from stressing the javascript components. Then it goes to a display test. The Start button can run or stop timer by toggling. The reset will Bring timer to 0000, format is min-sec.

Set by pressing select to get a marker over orange digit, Use Scroll to set number. Press Start to start timer, Start to be off to set again. The buzzer will turn on when Time elapsed matches time set. and the alarm relay trips. And a Flashing Annunciator signals end of process. Now Reset will start process again and stop flashing LED.

A Web Widget which is a Preset Timer. This can be Programmed from any Browser. It can also be modified to control external outputs. This project will only be a Web Gadget for Education, it will not have any external interface.

Digital Timers, Counters and Clocks

Controls –

  • Power – Powers On or Turns off Gadget.
  • Select – Selects Digit to be set with an Arrow Marke.
  • Scroll – Increments the Value of the Digit, Rolls over.
  • Start – Starts a Timed Process, Stops-Pauses a Process.
  • Reset – Resets the entire Cycle, Brings Process Time to Zero.

Outputs –

  • Process Time – Seven Segment Green LED Display.
  • Preset Time – Small Seven Segment Orange Display.
  • Annunciator – Green – Red LED Flasher Signals Alarm.
  • Status – Text Status of Program, Below Process Time.

Leave a Reply