Home Automation by Edward Cheung

“This centralized system can control almost all of the lights in my home, a few appliances, the garden irrigation, some window treatments, the Audio/Video system, the security system, and the HVAC (Heating Ventilation and Air Conditioning).”

Home Automation by Edward Cheung

“This centralized system can control almost all of the lights in my home, a few appliances, the garden irrigation, some window treatments, the Audio/Video system, the security system, and the HVAC (Heating Ventilation and Air Conditioning).”

Home Automation by Edward Cheung

“I can communicate with the central computer by using keypads throughout the house, any phone in the world (including those inside the home), any browser over the internet, and from my wrist watch. A webcam (with integral pan/tilt) allows me to see what is happening with nothing but a web browser.”

  • K8CU – Bill Jones – Radio Amateur
    K8CU – Bill Jones – Radio Amateur Bill Jones, K8CU, has been an active Radio Amateur, CW Dxer, and home project builder since first receiving [...]
  • AVR XMEGA Oscilloscope and Waveform generator
    The Xmegalab is a development board for AVR XMEGA microcontrollers, a dual channel oscilloscope, an arbitrary waveform generator and a scientific calculator. AVR XMEGA Oscilloscope [...]
  • Van Ooijen Technische Informatica
    Wouter van Ooijen runs VOTI is an engineer who has worked on many software and systems projects. He has a Webshop with PIC Parts and [...]
  • Hendricks QRP Kits – QRPKits
    Hendricks QRP Kits – QRPKits   Hendricks QRP Kits is a company that specializes in high quality, low cost QRP Kits.
  • Amateur Radio and Calculators for ElectronicsAmateur Radio and Calculators for Electronics
    John Owen has made Enriching Electronics Pages at vwlowen.co.uk. There are many Ham Radio projects too. Amateur Radio and Calculators for Electronics A highlight is [...]
  • BlackBoard – Circuit Layout.and Simulation
    An Open Source “Learning EDA” Software which can setup circuit layouts. You may use it for stripboards, perfboards, breadboards, and even for plain circuitry or [...]
  • FreePCB – PCB editorFreePCB – PCB editor
    FreePCB is a free, open-source PCB editor, released under the GNU General Public License. It was designed to be easy to learn and easy to [...]
  • Circuit Cellar – The Magazine for Computer ApplicationsCircuit Cellar – The Magazine for Computer Applications
    Since its founding in 1988, Circuit Cellar has delivered exactly what its paying subscribers demand-intensive, exploratory articles about hardware and software methods for embedded-control systems. [...]
About delabs 462 Articles
delabs is a web-service for product design and development.

Be the first to comment

Leave a Reply