Sometime around 2008 i wrote this. It is more of Humor and less of Reality.
Vibration Pressure are Related, Pressure is related to Temperature, Sunlight has Infra Red & Heating Ability. This should Ring some Bell.
You have Heard of Solar Cells and Panels, Sunlight to Power. Heard of Piezoelectric Energy, Vibration to Electricity
Solar – Heat – Pressure – Vibration – Electricity !! New Hybrid Solar Cell ! Someone has to just Invent it. It should Flash a few Lamps.
Micro Mech Lithography. Tiny Cantilevers, Tiny Silicone bulb of Volatile Liquid. Mini Lens Heats the bulb. Cantilever is bent a few Microns.
Pressure sensitive valve deflates Bulb suddenly, The Piezoelectric Cantilever goes Twang. The Electric Pulses charge a Supercap and battery.
The Vaporized Liquid has Condensed, it goes back to the cells by Gravity, The Shrunk Bulb draws the liquid. Ready for next Cycle.
If it works, credit me, else all credits go to Tweedledum and Tweedledee.
Once upon a Time – by delabs
There are places like your Backyard, outdoors, a village… where your Gadgets will stop working !!!
You will feel suffocated when your Smartphone or Tablet fails to respond to your caring strokes. Your Dupey is perishing due to Undernourishment. All you need is “Electronic Solar Umbrella” which was invented by me delabs on June 1st 2014.
The Red Light is for Data Networking SmartUmbrellas using Advanced Multi-Threaded Infra Red Technology.
SUN – Smart Umbrella Networking
I just invented the SmartUmbrella – My Drone is Rushing to the Patent Office.
(Keep this confidential till my drone returns safely, the beagle boys are using Blimps with Large Magnets to capture Drones.)
CirKits – Solar Power Electronic Projects
CirKits SCC3 Photovoltaic Charge Controller kit, SPC3 Solar Power Center kit, and DAS1 Dark Activated Switch kit.
SPC3 – 12 Volt 9 Amp / 10 Amp Solar Power Center Kit
The SPC3 kit contains all of the circuitry for a medium-sized solar power system. It includes a solar charge controller for battery charge regulation, a smart on/off power switch with automatic low voltage disconnect operation and a built-in white LED lighting system. Additional lights and other 12V devices can be connected to the load terminals and controlled by the SPC3. The SPC3 can regulate up to 9 amps of incoming solar power and can switch an external load of up to 10 amps.
The kit includes:
- A high quality double sided, silk screened circuit board.
- All of the parts required for building the board.
- A schematic and wiring diagram.
- Easy step-by-step assembly, alignment and usage instructions.
CirKits is a division of SolOrb.