PICuP ProtoBoard – BitScope Designs
ProtoBoard started life as ProtoPOD.It was designed as a prototyping POD for use with BitScope making development of new (PIC based) POD designs easy.
It is a small (2.6″x4.0″) PCB comprising a 20 x 13 thru-hole prototype grid pre-wired with 4 busses and a 40 or 26 pin header with pads for connections into the circuit.
PIC ICE Probe – When you need to analyse an existing circuit that has a PIC in it you may wish to observe signals at the PIC pins to diagnose a fault.
Data Logging – ProtoBoard includes a serial interface which can be used as the basis for any number of data logging projects. The PIC may be programmed to monitor some external variables and then transmit the data to a remote PC as required.