The Radio Electronics Magazine

Radio-Electronics was an American electronics magazine that was published under various titles from 1929 to 2003.You can Read them all here .

Radio Electronics Magazine at The Internet Archive

Recently i found a collection of those mags at Archive.org …..

Radio Electronics Magazine at Archive.org

Hugo Gernsback, sometimes called The Father of Science Fiction, started it as Radio-Craft in July 1929. The title was changed to Radio-Electronics in October 1948 and again to Electronics Now in July 1992. In January 2000 it was merged with Gernsback’s Popular Electronics to become Poptronics.

Gernsback Publications ceased operations in December 2002 and the January 2003 issue was the last.

Over the years, Radio-Electronics featured audio, radio, television and computer technology. The most notable articles were the TV Typewriter (September 1973)[1] and the Mark-8 computer (July 1974). These two issues are considered milestones in the home computer revolution.

Radio Electronics Magazine at SWTPC

Radio-Electronics was aimed at electronics’ professionals such as radio and TV repairmen. And they were men, the tag line on the cover was “For Men with Ideas in Electronics”.

Radio-Electronics & Electronics Now

Radio Electronics was the “new” name for Radio Craft magazine.. Hugo Gernsback, sometimes called The Father of Science Fiction, started it as Radio-Craft in July 1929. The title was changed to Radio-Electronics in October 1948. In July of 1992 transitioned to “Electronics Now

  • HyperPhysics – Electronics BasicsHyperPhysics – Electronics Basics
    HyperPhysics is an exploration environment for concepts in physics which employs concept maps and other linking strategies to facilitate smooth navigation. For the most part, [...]
  • Yenka Interactive Software for Learning
    Simulation and modelling software, designed specifically for students to learn the basics of Electricity and Science. Yenka Interactive Software for Learning For maths they have [...]
  • Sam Electronic Circuits
    Sam has some wonderful Audio and Video circuits. He is from Greece the land of Mythology and the Gods. These are Electronic Circuits and DIY [...]
  • Open Source Robot Framework
    The basic setup you’ll need to build a plastic extruding CupCake CNC machine. from Bre Pettis Makerbot – 3D Mechanical Prototype Synthesis Makerbot is an [...]
  • Solar Piezoelectric Cell
    Sometime around 2008 i wrote this. It is more of Humor and less of Reality. Vibration  Pressure are Related, Pressure is related to Temperature, Sunlight [...]
  • Accelerometers in Robots and Moving Things
    An accelerometer is a device that measures non-gravitational accelerations. These are accelerations produced by mechanically accelerating the accelerometer via its casing. – Accelerometer Wikipedia Sci-Spot.com [...]
  • PICkit 1 Flash Starter Kit of Microchip
    This is a low-cost development kit with an easy interface for programming Microchip’s 8/14-pin FLASH family of uC. You can speedily program, evaluate and develop [...]
  • MCU 8051 IDE and other ToolsMCU 8051 IDE and other Tools
    A modern graphical IDE for microcontrollers based on 8051. MCU 8051 IDE is an integrated development enviroment. Supported programming languages are C and assembly. It [...]
About delabs 466 Articles
delabs is a web-service for product design and development.